超高强铝合金LC9的超塑性研究

工业牌号超高强铝合金LC9经过两种不同方式的预处理后,在一定的温度和应变速率范围内呈现出良好的超塑性。材料经过形变热处理(TMT)后,在最佳超塑性条件下拉伸(T_(TMT)=515℃,ε_(TMT)=1.66×10~(-3)s~(-1)),获得很高的延伸率δ_(TMT)=1300％,低的流变应力σ_(TMT)=1.7MPa和高的应变速率敏感性指数m_(TMT)=0.66。经过简单锻造预处理后,在最佳超塑条件下(T_f=405℃、ε_f=1.66×10~(-3)s~(-1)),材料仍能获得δ_(f)=380％、σ_(f)=16MPa、m_(f)=0.3。TMT预处理中,η相粒子分布状态对获取微细组织起着决定性作用,η相的回溶降低了材料的空洞敏感性,抑制试样早期断裂。经过两种方式预处理的试样超塑性断裂形式分别为空洞型失稳断裂和颈缩型稳定断裂。     

论承包经营企业的短期行为及其对策

本文针对承包经营企业中的短期行为问题,列举了它的表现形式并对其成因进行了分析,在此基础上,提出了若干现实对策。     

A user-friendly yield criterion for metals exhibiting tension-compression asymmetry

The aim of this paper is to model the yielding asymmetry of pressure-insensitive metals, including but not limited to Ni₃Al alloys. The main focuses are put on the flexibility and manipulative convenience. The parameters of theory are kept to a minimum and can be determined by as few tests as possible. These requirements are fulfilled by constructing a yield function using the second and third-invariants of a linearly transformed stress tensor. The proposed yield criterion has a simple mathematical form and has only seven parameters when used in three-dimensional stresses. Compared with existing theories, the new yield criterion has much fewer parameters, which makes it very convenient for practical applications. The coefficients of the criterion are identified by an error minimization procedure. Applications to a Ni₃Al based intermetallic alloy as well as a Cu-Al-Be shape memory alloy and comparison to other criteria show that the proposed criterion has nearly the same predictive ability and flexibility with other criteria. The proposed yield criterion can estimate the coefficients by using less data, which is a big advantage compared with other similar theories, especially when there is a limited number of experimental data.     

基于故障行为的惯导产品贮存寿命试验设计

以典型惯导产品加速度计贮存寿命评估为例,提出了一种基于故障行为模型的加速退化试验设计方法,解决了缺乏预试验数据情况下试验应力水平设计的问题。在通过对产品特性和主机理分析基础上,确定表征产品贮存寿命特征参数及试验应力,构建了考虑材料等分散性的加速度计故障行为模型,用以描述参数加速时变规律的特性。在试验应力最高水平确定的情况下,基于给定置信度和故障行为模型,以高应力水平下退化量的置信下限与低应力水平下退化量的置信上限不交叉为原则,采用基于仿真的加速退化试验设计方法,优化确定低应力和中间应力水平,从而设计给出试验剖面,并给出了加速退化试验方案优选流程,最终从备选方案集中确定加速度计试验最优方案。通过实际案例分析,验证了该方法的有效性。      

基于效用价值驱动的旅客出行动力学研究与建模

为了探究交通体系中旅客出行行为的特征与机理,以某机场离港旅客的陆侧出行数据为研究对象,对旅客出行模式进行了统计。分析发现,旅客聚集行为具有强烈的阵发性,不同出行维度旅客群体的聚集时间间隔分布具有幂律特征,且幂指数和阵发性强度呈正相关关系。同时,研究认为旅客出行换乘决策是综合时间、费用、便捷舒适度、突发情况等多因素的期望实现,是一种基于效用价值驱动的人类行为。基于此构建了效用价值驱动模式下的旅客出行行为动力学模型,可输出幂指数为参数可调的幂律分布,且仿真输出和实证数据分析结果相吻合。      

宽高比及表面粗糙度对矩形微尺度通道流动特性的影响

实验研究了不同宽高比矩形金属微尺度通道的流动特性,并与硅通道对比来探究表面粗糙度的影响。金属微尺度通道宽为0.4mm,通道宽高比分别为0.50、0.67、和1.00,相对表面粗糙度范围为0.1609%~0.2145%。硅通道宽度及高度都为0.4mm,相对表面粗糙度为0.00325%。实验工质为空气,实验的雷诺数范围是250~3000。实验结果表明:在粗糙微尺度通道会发生转捩提前,并且转捩雷诺数随着宽高比增大而减小。在层流区,微尺度矩形通道摩擦因数随着雷诺数增大而减小,在转捩区出现明显增大后再减小。表面粗糙度很小时,未发现转捩提前现象。      

挂滴燃烧中的微汽泡行为和液滴跳动

利用高速显微摄像技术,观察研究了RP-3微尺度挂滴燃烧过程中,微汽泡的核化、生长、聚并和溢出的行为过程及液滴跳动现象.结果得出:①液滴中微汽泡产生的位置;②在蒸发初期时由微汽泡引起液滴体积的膨胀;③在燃烧中由汽泡行为导致液滴的跳动;④液滴燃烧的稳定(不爆裂)现象.分析了表面张力在挂滴燃烧过程中的作用,确定了挂滴稳定燃烧的临界条件下的临界特征体积在2.5~5.0μL.      

基于眼动数据的网络搜索行为预测方法

预测用户的网络搜索行为对改进搜索引擎和提升用户体验十分重要.现有大多数方法是基于用户的交互数据,如查询、点击和鼠标移动等.提出一种基于眼动数据的用户网络搜索行为预测方法.通过眼动实验,采集用户在网络搜索任务时的眼睛运动数据,将这些数据转化成两种数据格式:直方图和序列.直方图数据描述用户注意力的分布情况,序列数据呈现用户的扫视路径.使用4种学习算法对用户决策或用户意图进行预测,同时研究两种数据格式的性能.结果显示,两种数据格式均适合于预测用户决策,而序列数据更适合于预测用户意图.该结果表明,利用眼动数据能够有效预测网络搜索行为.      

Micro-mechanical model for predicting the elasto-plastic behavior of composites based on secant formulation method

To predict the Elasto-Plastic Behaviors (EPBs) of aligned inclusions reinforced composites, this paper develops an interpolative Mori-Tanaka/Double-Inclusion (MT-DI) homogenization model with the secant formulation, and gives the numerical implementation algorithms of the developed MT-DI model with the secant formulation. The Finite Element (FE) homogenization method is implemented to provide the “exact” EPBs of the composites and thus validate the MT-DI model with the secant formulation. The MT-DI model with the 2nd-order secant formulation is validated to provide the more accurate predictions, while the MT-DI model with the 1st-order secant formulation always gives the stiffer predictions. The results show that using the macro-stress and macro-strain as the inputs, the MT-DI model with the secant formulation gives the identical predictions. The predictions of the MT-DI model with the secant formulation vary between those of the MT and DI models with the secant formulation. Meanwhile, the MT-DI model with the secant formulation does not predict the accurate EPBs for the phases of the composites.     

Towards intelligent design optimization: Progress and challenge of design optimization theories and technologies for plastic forming

Plastic forming is one of enabling and fundamental technologies in advanced manufacturing chains. Design optimization is a critical way to improve the performance of the forming system, exploit the advantages of high productivity, high product quality, low production cost and short time to market and develop precise, accurate, green, and intelligent (smart) plastic forming technology. However, plastic forming is quite complicated, relating to multi-physics field coupling, multi-factor influence, multi-defect constraint, and triple nonlinear, etc., and the design optimization for plastic forming involves multi-objective, multi-parameter, multi-constraint, nonlinear, high-dimensionality, non-continuity, time-varying, and uncertainty, etc. Therefore, how to achieve accurate and efficient design optimization of products, equipment, tools/dies, and processing as well as materials characterization has always been the research frontier and focus in the field of engineering and manufacturing. In recent years, with the rapid development of computing science, data science and internet of things (IoT), the theories and technologies of design optimization have attracted more and more attention, and developed rapidly in forming process. Accordingly, this paper first introduced the framework of design optimization for plastic forming. Then, focusing on the key problems of design optimization, such as numerical model and optimization algorithm, this paper summarized the research progress on the development and application of the theories and technologies about design optimization in forming process, including deterministic and uncertain optimization. Moreover, the applicability of various modeling methods and optimization algorithms was elaborated in solving the design optimization problems of plastic forming. Finally, considering the development trends of forming technology, this paper discusses some challenges of design optimization that may need to be solved and faced in forming process.